Vcds Usb Driver Version 02.10.00 ^hot^ May 2026

VCDS USB Driver Version 02.10.00 is a legacy driver package released by Ross-Tech on May 12, 2014, designed to facilitate communication between genuine Ross-Tech USB interfaces and Windows-based PCs. While modern VCDS interfaces like the HEX-V2 operate as HID devices and do not require specific driver installations, this version remains a critical component for users of older "Legacy" interfaces who need stable connectivity on newer operating systems. Key Specifications of Version 02.10.00

This driver was developed to support high-speed data transfer between the VAG-COM Diagnostic System (VCDS) and the vehicle's control modules. Release Date: May 12, 2014. Developer: Ross-Tech.

Hardware ID Compatibility: Specifically targets USB/VID_0403&PID_FA24. File Size: Approximately 175 KB.

Supported Systems: Windows 2000 through Windows 8.1, including both 32-bit and 64-bit architectures. Compatibility and Use Cases vcds usb driver version 02.10.00

Version 02.10.00 is primarily used for Legacy Ross-Tech Interfaces such as the HEX-USB+CAN, Micro-CAN, KII-USB, and KEY-USB series.

Virtual COM Port (VCP) Support: This driver package often includes the ability to enable a Virtual COM Port, which allows third-party diagnostic software that only recognizes serial ports to function with Ross-Tech hardware.

Modern Limitations: While it supports a wide range of legacy hardware, it will not work with most 2019 or newer Volkswagen Group (VAG) vehicles, which require current interfaces like the HEX-V2 or HEX-NET. Installation Guide for Version 02.10.00 VCDS USB Driver Version 02

To ensure a successful installation, users should follow a manual process through the Windows Device Manager. VAG-COM: USB Driver Installation - Ross-Tech

Part 2: Disable Driver Signature Enforcement (Windows 10/11 only)

Since version 02.10.00 uses SHA-1 signatures (deprecated after 2021), you must disable driver signing temporarily or permanently.

Temporary Method (easiest for installation): Part 2: Disable Driver Signature Enforcement (Windows 10/11

  1. Hold Shift and click Restart from the Start menu.
  2. After reboot, go to Troubleshoot > Advanced Options > Startup Settings > Restart.
  3. Press F7 to select "Disable driver signature enforcement".
  4. Install the driver now.

Installation steps

  1. Close VCDS (if running).
  2. Run the driver installer package (v02.10.00) as Administrator: right-click → Run as administrator.
  3. Allow driver installation when Windows prompts (accept unsigned driver only if you trust the source).
  4. After installer completes, connect the VCDS USB cable to the PC and to vehicle (or just PC).
  5. Windows should recognize the device; open Device Manager → look under “Ports (COM & LPT)” or “Universal Serial Bus controllers.”
  6. Note the COM port assigned (e.g., COM3). In VCDS settings, set the cable port to that COM number.

Report: VCDS USB Driver Version 02.10.00 – Compatibility & System Assessment

Date: [Insert Date] Prepared by: [Your Name/Department] Subject: Evaluation of VCDS USB Driver v02.10.00 for Diagnostic Interface

Why You Need Version 02.10.00 (And Not an Older One)

Many users ask, “If my old driver works, why update?” Here’s why version 02.10.00 should be your baseline:

How to Install VCDS USB Driver Version 02.10.00: Step-by-Step Guide

Installing this driver is straightforward, but a single misstep can lead to frustration. Follow this exact procedure: