Product Code: SMB-D115
Series: S-Model
Variant: 115 Top
The “Top” model includes a built-in dynamic braking chopper, allowing it to dissipate regenerative energy into an external resistor. This prevents DC-link overvoltage during aggressive deceleration of high-inertia loads. smbd115 s model 115 top
The SMB-D115 S-Model 115 Top represents a significant leap forward in the SMB (Smart Modular Build) lineup. Engineered for environments where standard components fail, this "Top" variant is the flagship configuration of the S-Model 115 chassis. It combines enhanced thermal management, a reinforced structural frame, and expanded I/O capabilities, making it the ideal choice for industrial automation, edge computing nodes, and high-vibration transportation systems. Overview The SMB-D115 S-Model 115 Top represents a
Q: Can I use the SMBD115 S Model 115 Top with a motor from another brand? A: Technically yes, but you will need to manually enter the motor parameters (stator resistance, inductance, flux). The auto‑tune will still work, but peak torque might be reduced. For best performance, stick to the same brand’s motor series. Frequently Asked Questions (FAQ) Q: Can I use
Q: Does the “Top” model include a display? A: No. The SMBD115 Top does not have a built‑in HMI. You need the software or a separate operator panel (e.g., VCP 05) connected via the serial port.
Q: What is the difference between “S Model” and “F Model”? A: The S Model is the standard position/speed/torque drive. The F Model includes additional firmware functions like a built‑in motion controller and programmable logic (PLC features) on the drive itself.
Q: Is the SMBD115 S Model 115 Top suitable for vertical load applications (e.g., a Z‑axis)? A: Yes, but you must wire a holding brake to the drive’s auxiliary output. The STO function alone does not prevent gravitational fall. Use the integrated brake control (parameter P-0-0121) to sequence the brake with the drive enable.