Master Guide: Essential Ericsson MINI-LINK CLI Commands for Network Professionals
3.1 General System Commands
| Command | Description |
|---------|-------------|
| show version | System hardware/software version |
| show running-config | Current active configuration |
| show startup-config | Saved configuration |
| write memory / copy running-config startup-config | Save config |
| show system | System uptime, temperature, voltage |
| reboot | Restart the unit |
12. Troubleshooting & Diagnostic Commands
| Command | Description |
|---------|-------------|
| ping 10.10.10.1 source 192.168.1.10 size 1500 | Ping with source IP and payload size |
| traceroute 8.8.8.8 | UDP traceroute |
| test cable-diagnostic ethernet 1 | TDR test – cable length & faults |
| show process cpu | CPU utilization per process |
| show memory | Memory usage |
| debug radio event | Real-time radio events (caution) |
| debug ethernet packet | Packet capture to console (high load) |
6. System Maintenance & Alarms
Radio Configuration (Example for MINI-LINK 6352)
Before configuring radio, ensure the unit is in offline or maintenance mode if changing frequencies.
MINI-LINK(config)# radio
MINI-LINK(config-radio)# hop 1
MINI-LINK(config-hop)# frequency 17500 # MHz (e.g., 18 GHz band)
MINI-LINK(config-hop)# tx-power auto
MINI-LINK(config-hop)# modulation adaptive 2048QAM to BPSK
MINI-LINK(config-hop)# remote-id 2 # ID of opposite end
MINI-LINK(config-hop)# admin-state up
Cleared and acknowledged alarms
clear alarm
